Flexicolor™ CQ 1.89 L Pre Mixed Grout

Acrylic pre mixed grout is composed of 50 -75% silica sand and 2.5 – 5% titanium dioxide. It features BioBlock® technology to resist mould and mildew. This pre mixed grout is crack, stain and chemical-resistant. Pre mixed grout with shrinkage-controlled formulation, has relative density of 1.77 g/cm3. The liquid form pre mixed grout has curing time of 6 days and dry time of 24 hours. It has pH range of 8.3 and flash point of greater than 100 deg C. It comes in a 1.89 L container. Pre mixed grout comes in specialized pail design with flip-top hinged lid. It is suitable for grouting joints from 1/16 in – 1/2 in. It is ideal for grouting interior/exterior floor, walls, countertops and backsplashes. It is suitable for use with glass tile/mosaics as well as porcelain, ceramic and natural stone tile, quarry and cement-based terrazzo. This pre mixed grout can be used in wet conditions like bathtub surrounds, shower walls and shower floors. Pre mixed grout meets ANSI standards.

• This grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evapouration of the low level of water in the formulation
• Comparison testing of MAPEI Flexcolour CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolour CQ is 30% more cost-efficient and requires 65% less time to install
• Stain- and chemical-resistant grout formulation with no sealing required
• Easy cleanability, colour consistency and improved workability
• Dries to a hard, uniform colour surface in 24 hours and will not stain surfaces
• Crack-resistant and shrinkage-controlled formulation, with no efflorescence
• Bibcock® technology for mould and mildew resistance
• Use straight from the pail, without the need to add water
• Specialized pail design with flip-top hinged lid
• Standards: Meets or exceeds specific tests in ANSI A118.3 and A118.6 covering other grout types